1 x AGA-T2 Rebuildable Atomizer in Stainless Steel with Glass Tank (Tube)
1 x Piece of Stainless Steel Mesh
1 x Heat-Wire for Coil
2 x Extra Black O-Rings
1 x Extra Screw
1 x Extra Clear Silicone O-Ring
1 x Extra Silicone Piece
1 x Extra Knurled Nut
1 x Extra Black O-Ring
The New AGA-T2 Atomizer Tank has a Snap-on Top Cap, No Threading to Screw on the Top Cap; this enables you to line up the air-hole to your preference. Version 2 has an upgraded Glass Tube that is a very nice upgrade.
Take a look at our Stainless Steel Drip Tips; the AGA-T2 is compatible with 510/901 Drip Tips
Take a look at our Wick and Wire products for rebuilding your atomizer.
The AGA-T2 is now individually boxed!
*This is an advanced user device.
Due to the nature of this product there is no warranty. This product requires experience and knowledge of rebuildable atomizers; specifically Genesis Style Rebuildable Atomizers.
All units are inspected and checked prior to shipping.
Rebuildable atomizer: The user of this atomizer must install wick and wire (coil) in order to use it. This atomizer is not pre-installed with coil. Installation is required. Wick, wire and mesh sold separately.
Important Note: Rebuildable atomizer coils and wicks have known risks.
Rebuildables are for experts, not average or beginner vapers with no multimeter or knowledge of how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
This is because:
1. A rebuildable coil/wick MUST be tested carefully with a meter before it is used. 2. If it is not tested it is entirely the risk of the user. 3. Faulty wicks/coils WILL blow electronic devices. 4. New coil/wick units must be tested and then used first on a strong basic electrical APV that has short circuit protection. 5. No new coil/wick assembly should be used on an electronic device until known to be safe. 6. These items destroy electronic devices if faulty. This is a known issue.